高线电压小工作电流应力测试仪（耐焊弧应力测试仪）-（电子计算机抑制）

High voltage low current tester (arc resistance tester) - (computer control)

企业产公司名称称：耐电弧试验机

Product name: electric arc resistance tester

护肤品材质：NDH-A

Product model: NDH - A

无法的标准：GB/T 1411-2002《粉状接地涂料耐高偏低电流量焊弧释放电能的现场实验》（等一起IEC  61621-1997）及ASTM D495等准则的标准要求方案生产的，并适合IEC 149、UL 746A等实验方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

包括符合范围图及职能：

本试验机是，并按照应用软件于高压电机、电商和家居电商等市场的水电工用氟塑胶片、不饱和树脂胶胶和隔热漆等隔热用料的耐电孤特性认定，主适用固态物隔热用料如：氟塑胶片、pet薄膜、不饱和树脂胶、黑云母、淘瓷、的玻璃、隔热油、隔热漆、瓦楞纸板等材质的耐电孤特性试验；

本测试机由计算方法机掌握工作，应该表现现阶段测试工作状态及测试日子，测试结尾后并导出现阶段测试统计数据，并可直接打印.标准规范实验所上报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为横竖整体组成，下边为运营体统，顶部为耐压试验仪。

2 本產品使用*新智能化调节技术设备，借助选取过程（IEC或ASTM）可手动开展经过多次实验发现，并在线上上呈现检验流程和可是。

3 **性能指标优秀，抗电磁波辐射效率强，测试仪要求高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断事件计算误差：超过 ±10ms

2 调压器发热量：2kVA

3 载荷系数试验报告电压值：12.5kV

4 耐压的电压表面粗糙度：±3%

5 电压抑制精确：±10%  感应电流在线测量计算精度：1.5%

6 工业对制样心理压力：（0.5±0.05）N

7 电极片产品：钨棒

8 参比电极距：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 安全使用环境湿度表：（23±2）℃

10 食用周围环境温湿度：（50±5）%

11 供电：220V±5%  50Hz  10A

12 试验台    技巧：   行业标准/美标/10 mA 连续性/20 mA 维持/30 mA多次/40 mA连着

13 经过多次实验发现步骤正确：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品型号规格：

NDH-A    耐电孤检验仪-微机控制

NDH-B    耐弧光疲劳试验仪-触屏屏管理

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！